866-626-PUMP

Davey Firefighter® Fire Pumps

Now available with Honda or Briggs & Stratton Engines!

Depend on DAVEY
Pumps

AFFORDABLE, TRUE  HIGH-PRESSURE FIRE PUMPS !
Delivering over 390 feet of vertical lift ! (170+ psi)

Davey's exclusive Firefighter® 5+ Series high-performance wet ends provide proven, reliable firefighting capability by delivering both the flow and high pressure needed for serious firefighting.

With ultra-reliable Briggs & Stratton Vanguard or Honda OHV engines and a unique twin-impeller design, these portable workhorses will blow away so-called 'high-pressure' and 'high-volume' trash pumps that some try to pass off as fire pumps.

The fact is, most firefighting equipment is designed to operate at 100 PSI or more.  A pump that cannot sustain 100 PSI at the flow rates used for firefighting will provide poor performance when performance matters the most! Unlike converted high-volume sump, dredging or waste water pumps that others might try to sell you, our Davey Firefighter® pumps are built specifically to provide both the high flow & high pressure required for serious firefighting.

Davey Products Pty. Ltd., Australia, has been a world leader in pump manufacturing since 1934 and their Firefighter Series of pumps are in use with fire departments worldwide.  Their NEW Davey Firefighter® 5+ Series features an improved impeller design and overall increased performance.

NOTE: The bare pumps on this page feature NPT threaded fittings and
require threaded adaptors in order to be compatible with standard fire hoses.


Davey Firefighter® 5+ Series Performance Curves


 Note: Performance data derived from Davey Firefighter® pump specifications.  As with any engine driven device, performance may vary due to gas quality, altitude, suction lift and other factors and should be considered when choosing a pump.

 
Davey Firefighter® Pump Features:
  • Twin Impellers for maximum GPM & PSI
  • 3-Way NPT discharge port (2x1", 1x1.5")
  • 1.5" NPT Suction Inlet
  • Nitrile rubber seal & casing "O" rings
  • Self priming up to 19 feet
  • Manual recoil starter on 5.5 hp & 6 hp
  • Manual & Electric starters on 9 hp & 13 hp
  • Low oil protection
  • ONE YEAR PUMP WARRANTY
  • TWO YEAR ENGINE WARRANTY

Vanguard 6hp Pictured Above
Dimensions (Approximate)
24" L x 15" W x 15" H x 60 lbs.
)

5.5 hp & 6 hp Twin Impeller Fire Pumps
Featuring Davey Firefighter® 5+ Series Wet Ends

 

Discharge
Flow Rate
6 hp
B&S Vanguard
5.5 hp
Honda GX160
50 GPM 85 PSI 68 PSI
30 GPM 120 PSI 97 PSI
15 GPM 142 PSI 112 PSI
0 GPM 152 PSI 118 PSI
Part Number PDFF6BST PDFF55HT
Our Low Price $ CALL $ CALL

Vanguard 9 hp Pictured Above
Dimensions (Approximate)
25" L x 17" W x 18" H x 80 lbs.

9 HP Twin Impeller Fire Pumps
Featuring Davey Firefighter® 5+ Series Wet Ends

 

Discharge
Flow Rate
9 hp
B&S Vanguard
9 hp
Honda GX200
95 GPM 80 PSI 75 PSI
50 GPM 125 PSI 110 PSI
30 GPM 140 PSI 120 PSI
15 GPM 150 PSI 125 PSI
0 GPM 152 PSI 130 PSI
Part Number PDFF9BSTES PDFF9HTES
Our Low Price $ CALL $ CALL

Vanguard 13hp Pictured Above
Dimensions (Approximate)
26" L x 19" W x 18" H x 100 lbs

13 HP Twin Impeller Fire Pumps
Featuring Davey Firefighter® 5+ Series Wet Ends

 

Discharge
Flow Rate
13 hp
B&S Vanguard
13 hp
Honda GX
100 GPM 100 PSI 100 PSI
75 GPM 130 PSI 120 PSI
50 GPM 150 PSI 135 PSI
30 GPM 160 PSI 140 PSI
15 GPM 165 PSI 145 PSI
0 GPM 170 PSI 150 PSI
Part Number PDFF13BSTES PDFF13HTES
Our Low Price $ CALL $ CALL

Dimensions (Approximate)
25" L x 18.5" W x 19.5" H x 110 lbs.

Shipping Weight:
140 lbs

10 HP Yanmar Diesel Twin Impeller Fire Pump
Featuring Davey Firefighter® 5+ Series Wet Ends

Discharge
Flow Rate

10
hp Yanmar Diesel
100 GPM 75 PSI
75 GPM 95 PSI
50 GPM 110 PSI
30 GPM 125 PSI
15 GPM 130 PSI
0 GPM 140 PSI
Part Number PDFF10YTES
Our Low Price $ CALL

Note: All bare pumps above feature plain NPT threads...
Prefer a ready-to-go pump with fire hose fittings?

Click on the banner below for our complete selection of pre-configured Davey Firefighter® pump systems

Fire Pump accessories:

Home Firefighting®
Automatic Pressure Relief Valve Kit

NO FIRE PUMP SHOULD BE OPERATED WITHOUT ONE!

Running your pump with no water flowing through it can cause severe damage to the seals, cause the pump to seize and void your warranty!  This kit attaches to any 1" NPT discharge and includes all the parts necessary to allow for automatic return flow to the water source when the standard pump discharges are closed.

Adjustable pressure relieve valve features a stainless steel ball bearing valve designed for heavy duty use.  Includes a 200psi liquid filled pressure gauge for setting the relief valve and monitoring pump pressure.  3/4" GHT discharge.  All brass fittings.

# PRVKG200

$ CALL




PROUDLY MADE IN THE USA!

Not some cheap, flimsy import frame!

Battery tray & mounting bracket now included !

Home Firefighting®
Pump Roll Cage

THE TOUGHEST DAVEY PUMP ROLL CAGE AVAILABLE!
Our exclusive Pump Roll Cages feature heavy duty 1.5" diameter x 0.095" thick steel tubing (The same tubing used in race car roll cages), fully welded into a one-piece cage with a powder coated finish to protect your pump from damage under the most adverse conditions. Includes four replaceable heavy duty vibration damping rubber feet.  Easily converted to a hand cart with our Roll Cage Handle & Wheel kit sold separately below.

PRC30B fits all Davey Firefighter® series pumps and includes a built-in battery tray for a U1L-6 or equivalent 12v Battery (Battery clamping assembly included) 30" L x 19" W x 21" H 

# PRC30B

$ CALL


Home Firefighting®
Roll Cage Handle & Wheel Kit

Our exclusive Roll Cage Handle features heavy duty 1.5" diameter x 0.095" thick steel tubing (The same tubing used in race car roll cages) with a powder coated finish. Fits Pump Roll Cage above. Includes hangers for storing coiled suction hose, 12" pneumatic off-road tires/rims and steel axle w/mounting hardware.

# PRCHWK

$ CALL


HANDLE & AXLE PROUDLY MADE IN THE USA!


PROUDLY MADE IN THE USA!

Home Firefighting®
Pump Mounting Plate

Our exclusive Pump Mounting Plate features heavy duty 12 Gauge steel  with a powder coated finish. For permanent mounting of pumps to concrete pads, truck beds, etc... Pre-drilled for most Briggs & Stratton and Honda engine mounting.  Raised design allows accessibility to pump mounting hardware after installation.

# PCPMP

$ CALL

FOR FIRE HOSE FITTINGS AND ACCESSORIES CLICK HERE!

Have questions or want to place an order?
Call Toll Free (866) 626-PUMP or write sales@primopumps.com

Hours: Monday-Friday 8am-4pm Pacific Time

Back To Our Home Page

All material copyright © 2009 Western DataLynx Inc. Webhosting
Firefighter® is a registered trademark of Davey Products Pty Ltd.
Home Firefighting® is a registered trademark of Western DataLynx Inc.